• Siding, soffit and fascia are made of 3105 or equivalent aluminum alloy.
• Soffit is H18 or equivalent hardness, siding and fascia H16 or equivalent. Thickness: 0.019 nominal 0.024 nominal
• Meets performance requirements of AAMA 1402-86.
• Coating Characteristics
1. Name of coatings: Rollex Acrylic Finish.
2. Gloss: 9 to 12 on 60¡ Photovolt Meter, ASTM test D523.
3. Formability: No removal of finish with 610 Scotch tape on a 2T bend. NCCA test 11-19.
4. Pencil Hardness: HB Minimum, Eagle Turquoise.
5. Adhesion: Very good, ASTM test D3359. |
6. Humidity Resistance: No loss of gloss, cracking or peeling after 3,000 hrs. in 100% relative humidity, ASTM test D714 and method 6201of FTMS 141a.
7. Salt Spray Resistance: Withstand 5% salt fog for 3,000 hrs. ASTM test B117.
8. Impact Resistance: No visual cracking or Scotch tape pick-off when subject to impact in inch pounds equal to 1,500 times metal thickness. NCCA test 11-6.
9. Exterior Exposure: Fade: Shall not exceed more than 5 Color Difference Units within 5 years after removal external deposits. ASTM test D2244.
10. Dry Film Thickness: .70-1.00 Mils. |
